World of Education/World of Education.iso/world_x/xysee30a.zip/XYSEE.DMO

Text File | 1991-06-21 | 17KB | 738 lines

0 Null XYSee Tutorial MACRO... XYSee.DMO {6/14/91}
0 Null (c) 1991, Insight Advantage.
0 Null  All Rights Reserved.
0 Beep
0 Message
 == Welcome to the XY-Educational System ==
1 Message  Blank out the message line.

1 Message
 == Welcome to the XY-Educational System ==
2 Message
During this tutorial, you may...
5 Message
      ** Press <CANCEL> to END tutorial ! **
6 Message
     ** Press <ACCEPT> to PAUSE tutorial ! **
0 Beep
6 Message
As we tour, we will be...
5 Message
covering most of XYSee's Unique features.
6 Message
But first,  let's review MENU SELECTION.
6 Message
OPTIONS are selected by sliding the MOUSE, or...
5 Message
By pressing the UP & DOWN Arrow Keys, like this!
4 Down
1 Down
1 Down
1 Down
1 Down
1 Up
1 Up
1 Up
1 Up
1 Up
0 Beep
0 Message
To activate a selection, Press <ACCEPT>.
6 Message
In addition, <CANCEL> can fix most problems.
6 Message
Should you forget a key or get lost, refer to...
5 Message
the MENU TREE in the center of the screen.
6 Message
Finally, you may Press <F1> at any time for...
5 Message
Context-Sensitive HELP and addl. information.
6 Cancel to trigger a Help File
5 Null {Delay}
9 Accept to clear the Help.
0 Message
Before we continue, let's look around a bit.
6 Message
The MAIN MENU screen consists of...
5 Message
The Active-Selections panel on the left.
6 Message
The Menu Structure and...
5 Message
Key-Assignment diagram in the center.
9 Message
The Program-Status window at the lower right.
6 Message
And last, this Information line on the bottom.
6 Message
It's time now to start our journey through...
0 Beep
5 Message
        === X Y S e e ===
1 Message  {clear the comment line}

1 Message
        === X Y S e e ===
2 Message
Ready To Start?...
2 Message
Let's begin by reviewing the Main Menu OPTIONS.
6 Message
SELECT PLOT advances us to the FAMILY MENU,
5 Message
from where we will select our first function.
6 Down
0 Message
PUZZLE MENU options will be covered later.
6 Down
0 Message
RUN MACRO executes automatic routines.
6 Accept for the Macros Menu
0 Message
Select "0SINTEST" for an example of the...
5 Message
power and versatility of macros.
5 Message
Macro and puzzle files require a specific...
5 Message
Format, or Syntax to work correctly.
6 Message
Please refer to the Program Documentation for...
5 Message
additional information on these files.
6 Down for Tutorial
0 Message
This XYSee TUTORIAL was activated from here!
5 Up to Select Macro
1 Accept for the Macro File Directory
0 Message
You may select a macro to activate from...
5 Down to show file selection
1 Up to top
0 Message
XYSee's unique rotating file DIRECTORY.
6 Cancel
0 Message {Clear message line}

1 Down
1 Down
1 Down to Edit Files selection
0 Message
Let's take a quick look at XYSee's...
5 Message
      === E D I T O R ===
0 Beep
1 Message  {clear the comment line}

1 Message
      === E D I T O R ===
2 Message
EDIT FILES processes your puzzles and macros.
6 Accept for the Edit Menu
0 Message
An existing macro or puzzle may be selected...
5 Message
from the rotating file DIRECTORY and CHANGED.
6 Down
1 Down to New Macro
0 Message
NEW MACRO and PUZZLE files can be created and...
6 Accept for filename entry box
0 Message
given unique FILENAMES with this option.
6 Message
XYSee will automatically add the extension.
6 Cancel
1 Cancel
1 Up
0 Message
It's not hard to guess what EXIT XYSee does!
6 Up
0 Message
Lets take a quick look at the SETUP XYSee Menu.
6 Accept Enter the Setup Menu
0 Message
If you must operate your computer in a quiet...
5 Message
environment, you may toggle the SOUND OFF.
0 Accept turn sound OFF {Automatically initialized to ON}
6 Message
Let's turn the sound back ON during our tour.
0 Accept turn sound back ON
6 Down to Set Color
0 Message
If the COLOR SETTINGS are unappealing,
5 Message
you may select another set with this option.
6 Accept
7 Cancel
1 Down
1 Down to Files in X selection
0 Message
XYSee can access macro and puzzle files from...
5 Message
various disk drives, or from whatever Drive...
5 Message
and Directory Combination is currently active.
6 Message
By selecting a drive other than "X", you can...
5 Message
keep your program and data files separate.
6 Down to Configure Dos
0 Message
XYSee requires the services of several...
5 Message
disk files simultaneously.
5 Message
Your system provides this capability with...
5 Message
a FILES=20 statement in your CONFIG.SYS file.
6 Message
    ** AFTER CONFIRMATION **
1 Message {Blank the line}

1 Message
    ** AFTER CONFIRMATION **
2 Message
XYSee will Add or Change the statement.
6 Accept
0 Message
Don't worry, we're just looking this time...
9 Cancel
1 Up to Reset Setup
0 Message
After experimenting with different options,
5 Message
you may wish to return XYSee to...
5 Message
it's standard { DEFAULT } configuration.
6 Accept
7 Cancel
0 Message
Be sure to SAVE the changed configuration...
5 Message
upon exiting your XYSee session.
5 Up
1 Up to Registration
0 Message
XYSee is constantly evolving to better meet...
5 Message
your educational needs.
5 Message
Be sure to Register Your Copy to receive...
5 Message
the benefits of this ongoing process.
6 Accept  First registration screen.
5 Null {Delay}
9 Accept  Second registration screen.
0 Message
You may print the XYSee ORDER FORM from here!
0 Beep
9 Null {Delay}
5 Cancel
0 Message {Clear the message line}

2 Cancel
1 Accept to the Families Menu
0 Message
XYSee provides fully interactive coverage of...
5 Message
20 functions arranged in four FAMILY groups.
6 Accept to enter the Geometric Menu
0 Message
The basic set consists of POINTS and LINES.
6 Cancel
1 Down
1 Accept to enter the Conic Menu
0 Message
The intermediate set includes CONIC SECTIONS,
5 Cancel
1 Down
1 Down
1 Accept to enter the Trigonometric Menu
0 Message
and a full complement of TRIGONOMETRICS.
6 Cancel
1 Up
1 Up
1 Accept to enter the Advanced Menu
0 Message
Finally, the ADVANCED set consists of...
5 Message
specially selected PARAMETRICS and COMPOSITES.
6 Cancel
0 Message
The unique SELECT MODEL feature of XYSee adds...
5 Message
over fifty variations to these 20 equations.
6 Message
In addition, you may select eight of these...
5 Message
functions when preparing your Custom Puzzles.
6 Message
Now that we know how to move around XYSee,
5 Message
Let's start by investigating the SINE Wave.
6 Down
1 Down to the Trigonometric Menu
1 Accept
1 Accept to the Sine Module
0 Message
Each module begins with a Standard Display,
5 Message
defined by the Formula Panel below it,
7 Message
and the Variable-Values on the right.
7 Message
If you have selected a COLOR Mode, the...
5 Message
function being plotted will be in Yellow.
9 Message
Visualization aids will be in Green,
9 Message
and plot scale factor CHANGES will be in Red.
9 Message
SCALING is automatically adjusted to...
5 Message
a value appropriate for the current plot.
6 Message
Let's update some values and view the changes.
6 Message
First we'll SELECT the correct MODEL.
6 Up
1 Up
1 Accept Select Model
5 Entry  Y=Asin(BX+C)
4
0 Message
Then update the VARIABLES.
5 Accept to the Variables Menu
1 Down
1 Down to the Frequency Variable
1 Accept
3 0.8
0 Message
Only the Repetition Rate changed this time.
6 Cancel to replot
0 Message
XYSee automatically Plots New Values for us.
6 Message
Now let's go over some of the Plot OPTIONS.
6 Down
1 Down
1 Down to Statistics
0 Message
Each function is enhanced with up to seven...
5 Message
specially chosen plot STATISTICS.
6 Message
For example, the SINE module set contains...
5 Accept
9 Null {Delay}
9 Cancel
0 Message
Check the FAMILY MENU Help files for more...
5 Message
information on individual XYSee STATISTICS.
6 Up to Print Plot
0 Message
XYSee supports several popular PRINT Modes.
6 Message
Formula and variable data are also printed.
6 Accept
9 Message
We won't make a print of our current plot,
5 Message
as it can take a minute or so to complete.
6 Cancel
1 Up
1 Up Select Model
0 Message
Plot Complexity can match individual needs.
6 Message
Let's change the current SINE Model and see!
6 Accept to select model 3 Y=Asin(BX)
3 Entry
3
0 Message
XYSee automatically Resets the plot values.
6 Accept to Variables Menu
1 Accept
1 9.4
1 Down
1 Down to frequency 'B'
0 Message
XYSee's extensive protection system features...
5 Message
AUTOMATIC SUBSTITUTION for incorrect values.
6 Message
For example, let's try to enter a negative...
5 Message
{ ILLOGICAL } repetition rate.
5 Accept
1 -1.0 to enter a negative frequency
1 Cancel for error message
7 Cancel
0 Message
XYSee has made an Intuitive Substitution!
6 Message
XYSee also provides protection for...
5 Message
other common errors like "Division by Zero".
6 Down
1 Down
0 Message
    === O V E R L A Y S ===
0 Beep
1 Message  {clear the comment line}

1 Message
    === O V E R L A Y S ===
2 Message
With OVERLAYs, we can readily identify...
5 Message
changes in Magnitude and Phase, etc.
6 Accept to the Overlay Plot Menu
0 Message
The first step in using ovelays is to...
5 Message
"STORE" our current plot.
5 Message
Active Scales will also be saved and...
5 Message
used later when RESTORING our plot.
6 Accept to store the plot
0 Message
Even though it wasn't very exciting,
5 Message
we have successfully Stored our Sine wave.
6 Cancel
1 Down to the Cosine Module
0 Message
Let's setup a quick COSINE Wave example.
6 Accept
1 Up
1 Up
0 Message
First we'll SELECT the correct MODEL (3).
6 Accept
2 Entry
3
1 Accept to Variables Menu
0 Message
Then let's change one of the VARIABLES...
5 Accept
1 9.4
1 Cancel
0 Message  {Clear the message line}

1 Down
1 Down to the Overlay Plot Menu
1 Accept
1 Down to Restore
3 Message
Now, let's compare our COSINE Wave with...
5 Message
the SINE Wave we previously STORED.
6 Accept
0 Message
Can you see the phase difference?
6 Message
Maybe the CURSOR can help at this point!
6 Down to Cursor
0 Message
You may use your MOUSE or ARROW KEYS to...
5 Message
move the CURSOR to points of interest.
6 Accept
0 Message
For Example...
3 Up
1 Up
1 Up
1 Up
1 Up
1 Up
1 Up
0 Message
This is a Maximum Amplitude point, and...
5 Left
1 Left
1 Left
1 Left
1 Left
1 Left
0 Message
This is what a Phase Shift would look like.
6 Cancel out of Cursor
0 Message {Clear the message line}

1 Cancel out of Cosine
1 Cancel out of Family Menu
1 Cancel Main Menu
0 Message
There's lots more to come, but you may...
5 Message
      ** Press <CANCEL> to END tutorial ! **
0 Beep
6 Message
     ** Press <ACCEPT> to PAUSE tutorial ! **
6 Message
Now let's have some FUN !
3 Down
0 Message
    Ladies and Gentlemennn !!!
3 Message
** Presenting for your enjoyment **
3 Accept to Puzzle Menu
0 Message
      === P U Z Z L E S ===
0 Beep
1 Message  {clear the comment line}

1 Message
      === P U Z Z L E S ===
2 Message
Puzzles challenge your solution skills on...
5 Message
enigmatic combinations of Functions.
6 Message
Saaay What?..
3 Message
To give you an idea of what I'm talking about,
5 Accept to obtain puzzle directory
0 Message
Let's select a simple PUZZLE to Solve.
6 Accept to activate 0.PZL
0 Message
Our puzzle contains a single LINE and CIRCLE.
6 Message
Pretty basic, but good enough for our needs.
6 Down
1 Down to the Save Puzzle selection
0 Message
Current puzzle status can be SAVED at any time.
6 Message
Look for "XYSAVED" in the puzzle DIRECTORY.
6 Up to Solve Puzzle
0 Message
Let's advance to the GEOMETRIC MENU and...
5 Message
begin solving for the LINE in our puzzle.
6 Accept
1 Accept Geometric Menu
1 Down to Line
1 Accept
0 Message
Notice how our line Blinked!...
5 Message
The blink helps us identify the right function.
6 Message
Let's enter our best guess for the variables.
6 Accept to Variables Menu
3 Message
A Segment Length of 9.0 looks about right...
5 Accept to change X value
1 9.0
1 Down
0 Message
The Slope appears to be somewhat less than 1.0.
6 Accept to change A value
1 0.5
1 Up
0 Message
Okay, now let's try 3.0 for the Offset.
6 Accept to change C value
1 3.0
1 Cancel
0 Message
Oops, not quite right, let's try 1.7 this time.
6 Accept to Variables Menu
1 Up
1 Accept to change C value
1 1.7
1 Cancel
7 Accept out of solution message
2 Cancel
0 Message
Knowing the values ahead of time helps a lot!
6 Down
1 Accept to Conic Section Menu
1 Up
0 Message
For fun, let's pretend our CIRCLE was really...
5 Message
a PARABOLA...
3 Accept Parabola selection
0 Message
XYSee tries to help with the right selection.
6 Cancel out of 'type not present' message
1 Accept Circle selection
0 Message
Okay, let's go ahead and solve for our CIRCLE.
6 Accept Variables Menu
0 Message
First the Radius... Hmmm looks like about 8.0
6 Accept to change R variable
1 8.0
1 Down
0 Message
Now the Horizontal and Vertical Offsets...
5 Accept to change H variable
1 6.0
1 Up
1 Accept to change K variable
1 6.5
1 Cancel to replot
0 Message
Not quite close enough, let's check the...
5 Up
1 Up to Show Outlier selection
0 Message
      === O U T L I E R S ===
0 Beep
1 Message  {clear the comment line}

1 Message
      === O U T L I E R S ===
2 Message
Part of the fun of solving puzzles comes...
5 Message
from their Complexity.
5 Message
Sometimes however, we can use a little help.
6 Message
The SHOW OUTLIER feature provides...
5 Message
this assistance by identifying the variables...
5 Message
that are preventing our puzzle solution.
6 Accept to highlight R
1 Accept to the Variables Menu for contrast.
0 Message
Notice the COLOR Highlighting!
5 Message
TOLERANCE values define how close our...
5 Message
guess has to be to solve pieces of the puzzle.
6 Message
As each variable is brought within tolerance,
5 Message
It's special highlighting will be removed.
6 Cancel back to the Options Menu
1 Down
1 Down
0 Message
It is possible for some pieces of...
5 Message
our puzzle to be hidden out of view.
6 Message
When that happens, we can search for them by...
5 Message
changing the SCALE of our plot window.
6 Message
Let's ZOOM the scale on our plot to...
5 Message
verify the dimensions of our oversized circle.
6 Accept Zoom Scale selection
5 Entry
3
1 Accept to Variables Menu
0 Message
Let's try increasing the Radius to 10 and...
5 Message
see what happens!
3 Accept to change Radius variable
1 10
1 Cancel to replot
7 Message
That got it, now lets check our REPORT card.
6 Accept out of Solution Message
1 Up
0 Message
XYSee's PUZZLE REPORT gives a running...
5 Message
status of our Solution Performance.
6 Message
You may PRINT a copy of the report if desired.
6 Accept to obtain Puzzle Report
9 Null {Delay}
9 Cancel
0 Message
I hope you enjoyed our Simple Example.
6 Message
Your puzzles can be much more Challenging!
6 Message
For example, check out the "0COMPLEX" puzzle!
6 Cancel out of Puzzle Menu
0 Message
We're almost done touring XYSee, but...
5 Message
we shouldn't end this tour without...
5 Message
taking just a moment to enjoy some of...
5 Message
the beauty to be found in mathematics!
6 Accept to Families Menu
1 Up to Sketch Pad
2 Accept for a Sketch #1
5 Accept for another  #2
5 Accept for another  #3
5 Accept for another  #4
5 Accept for another  #5
5 Accept for another  #6
5 Cancel 'Thats all Folks'
3 Cancel to Main Menu
0 Beep
0 Message
That's about it for the Grand Tour folks,
5 Message
I hope you've enjoyed it...
5 Message
In closing remember, XYSee's goal is...
5 Message
to help you develop that Critical...
5 Message
  === I N S I G H T  A D V A N T A G E ===
0 Beep
1 Message  Blank out the message line.

1 Message
  === I N S I G H T  A D V A N T A G E ===
1 Message  Blank out the message line.

1 Message
  === I N S I G H T  A D V A N T A G E ===
2 Down
1 Down
1 Accept
1 Up
0 Message
Don't forget, to obtain the LATEST COPY of...
5 Message
        === X Y S e e ===
1 Message  {clear the comment line}

1 Message
        === X Y S e e ===
2 Message
merely print the REGISTRATION form, and...
5 Message
      === Mail it Today! ===
0 Beep
1 Message

1 Message
      === Mail it Today! ===
0 Beep
2 Message
     *** XYSee Tutorial MACRO ***
2 Message
         XYSee.DMO  (c) 1991,
2 Message
  Insight Advantage. All Rights Reserved.
2 Accept to loop forever
0 Stop
{********************************************************}